Hardware.AperturaERiparazioneDiUnPalmVx-Comments Versioni

Nascondi le modifiche minori - Mostra le modifiche da evidenziare

2010-03-19, 15:43 di Olaf -
Aggiunte le linee 1-8:

(:nl:)>>messagehead<<

Olaf — 19 marzo 2010, 15:43
I think I soldered it incorrectly: my iron has a very large tip, so I made short circuits and such. I tried to correct them, but, planning to do everything right on the first attempt, I think I left the battery connected, therefore maybe the chip was destroyed... I saw sparkles between the pins. If you know how to solder and you have a good iron, try it! I think you can still find the chips somewhere.
2010-03-19, 15:34 di Olaf -
Modificate le linee 1-2: da:

(:nl:)>>messagehead<<

a:

(:nl:)>>messagehead<<

Modificate le linee 4-16: da:

Interesting. Backlight in my Palm Vx also stopped working, so I have to reopen it as I didn't check the function of backlight before replacing the battery.

If you soldered the new EL driver chio and it did not work, so there has to be some other defect? =]

(:nl:)>>messagehead<<

Mr.White — 16 marzo 2010, 14:12
[=

Interesting. Backlight in my Palm Vx also stopped working, so I have to reopen it as I didn't check the function of backlight before replacing the battery.

a:

Interesting. Backlight in my Palm Vx also stopped working, so I have to reopen it as I didn't check the function of backlight before replacing the battery.

2010-03-16, 14:12 di MrWhite -
Aggiunte le linee 1-10:

(:nl:)>>messagehead<<

Mr.White — 16 marzo 2010, 14:12
Interesting. Backlight in my Palm Vx also stopped working, so I have to reopen it as I didn't check the function of backlight before replacing the battery. If you soldered the new EL driver chio and it did not work, so there has to be some other defect?
2010-03-16, 14:12 di MrWhite -
Aggiunte le linee 1-10:

(:nl:)>>messagehead<<

Mr.White — 16 marzo 2010, 14:12
Interesting. Backlight in my Palm Vx also stopped working, so I have to reopen it as I didn't check the function of backlight before replacing the battery. If you soldered the new EL driver chio and it did not work, so there has to be some other defect?
2008-08-17, 09:34 di Olaf Marzocchi -
Cancellata la linea 0:
Modificate le linee 4-19: da:

Ciao Olaf, ho un palmare identico che è caduto da una sedia e non funziona più, pensi che potresti ripararlo ? fammi sapere Giulio

jurisp@tiscali.it =]

(:nl:)>>messagehead<<

Giulio Guerrii — 10 agosto 2008, 17:57
[=

Ciao Olaf, ho un palmare identico che è caduto da una sedia e non funziona più, pensi che potresti ripararlo ? fammi sapere Giulio

a:

Ciao Olaf, ho un palmare identico che è caduto da una sedia e non funziona più, pensi che potresti ripararlo ? fammi sapere Giulio

2008-08-10, 17:57 di Giulio Guerrini -
Aggiunte le linee 1-12:

(:nl:)>>messagehead<<

Giulio Guerrini — 10 agosto 2008, 17:57
Ciao Olaf, ho un palmare identico che è caduto da una sedia e non funziona più, pensi che potresti ripararlo ? fammi sapere Giulio jurisp@tiscali.it
2008-08-10, 17:57 di Giulio Guerrii -
Aggiunte le linee 1-10:

(:nl:)>>messagehead<<

Giulio Guerrii — 10 agosto 2008, 17:57
Ciao Olaf, ho un palmare identico che è caduto da una sedia e non funziona più, pensi che potresti ripararlo ? fammi sapere Giulio