Olafsen – Tech and more
Articles and notes on various stuff
-
Replacing my ZFS Pool on Linux: From a 2013 OmniOS Layout To a 2×12 TB Exos Mirror
Starting point In November 2026 I replaced my main ZFS pool, tank, with a mirror of two 12 TB disks. These are my notes on how I did it, what I checked, and what went wrong afterwards, so I can repeat it next time. This article was generated via LLM and then edited by me,…
-
Simulating a Home Battery in Home Assistant: My Strategy
Why a virtual battery Before I owned a home battery, I wanted to know what one would actually save me in my house, with my solar panels and my consumption. Datasheet round-trip efficiencies and generic calculators were not good enough for that, so I simulated a battery inside Home Assistant with the battery_sim integration and…
-

Zendure SolarFlow 3000 AC+ Efficiency: Measurements And Tips
Why this data My Zendure SolarFlow 3000 Mix AC+ converts AC to battery and back at 93–94% at its best (1–2 kW), but below about 250 W of charging or 150 W of discharging it drops under 80%. Three full cycles measured from AC in to AC out returned 81.3% at 500 W, 86.9% at…
-
Same IP For All Network Interfaces On The Q1 Pro
How to connect to the Q1 Pro using the same IP, no matter whether it’s connected via Wi-Fi or Ethernet. These instructions (but not the article text) have been generated via ChatGPT and then tested on a Q1 Pro running FreeDi (Armbian bookworm). They are published here for easier retrival via links in discussion forums…
-
How To Avoid Dry Nozzles on Inkjet Printers
Inkjet printers dry out easily, leave them a month unused and you might need an expensive (and not always successful) nozzle cleaning procedure. This article provides a suggestion to solve the problem without requiring much user intervention. These instructions (but not the article text) have been generated via ChatGPT. They are published here for easier…
-
Upgrade The Moonraker Database
My Qidi Q1 Pro was originally running a very old stack of Klipper, Moonraker and operating system, so when I needed new features not available on such an old stack, I decided to upgrade the printer to FreeDi, an alternative stack with support for the integrated display, otherwise not supported by Klipper natively. The procedure…
-

Gratkit Firefly V2: How Much Power Actually?
I needed a filament dryer so after checking various reviews, notably the one from My Tech Fun, I bought a refurbished (with warranty) Gratkit Firefly V2, which costs just 35 Euro plus shipment. The dryer works really well and it has a (quiet) fan to circulate the air inside for uniform heating. It also has…
-

Dangers From 3D Printing ABS. A Myth?
How high are the actual emissions, once all factors are taken into account and compared with normally accepted thresholds?
-

Playing With An Aqara Smart LED Bulb
ESPhome on an Aqara Tunable white bulb? The problem I have used for some years an Aqara tunable white LED bulb for some years in the office, then bedroom at home: during the day light was kept colder with a script to adapt the colour temperature to the hour of the day, and during the…
-

FIAT Panda: LED di illuminazione interna
Sostituzione della luce di cortesia a incandescenza con una striscia LED Tutti gli altri articoli sulla Panda sono disponibili qui. La luce interna a incandescenza originale era molto debole, quindi ho pensato di usare un pezzo di striscia LED 12 V che avevo a casa per avere una illuminazione migliore. La striscia in uso viene venduta…